banner



Lever Safety Valve Assembly Drawing

In this article, you will learn about the lever safety valve – definition, main parts and working. It is used for the boiler. The main purpose of this safety valve is to prevent the explosion of the boiler due to the increased steam pressure. This device helps to prevent a major accidents in steam power plants where the steam boiler is used.

Definition

It is a type of safety valve which is used to maintain a constant safe working pressure inside a boiler.  It blows off the extra steam when the steam pressure exceeds the safe working pressure and prevents explosion.

lever safety valve

Main parts

lever safety valve working

A lever safety valve consists of a valve body that has flange fixed to the steam boiler. The valve seat made of bronze is screwed to the body. The valve seat contains the valve which is also made up of bronze. Since the valve seat and valve is made up of same material, the rusting is prevented. The strut transmits the thrust on the valve. One end of the lever is fixed as fulcrum. The other end is attached to the load. A guide is also provided to move the lever vertically.

Also Read:

  • Difference Between Fire Tube Boiler and Water Tube Boiler
  • Babcock and Wilcox Boiler – Construction, Working, Application, Advantages and Disadvantages
  • Locomotive Boiler – Construction Working and Application with Diagram

Working of Lever Safety Valve

  • In lever safety valve, during the normal pressure inside the boiler, the valve remains in the seat. The thrust applied by the strut made the valve to stay in the seat until the steam pressure exceeds the safe working pressure.
  • As the steam pressure inside the boiler exceeds the safe working pressure, the valve rises above the seat and steam blows off outside the boiler. The valve returns back to its normal position when the pressure inside the boiler falls back to its normal pressure.
  • The valve rises in the condition when the steam pressure force becomes greater than the thrust applied by the strut on the valve. The thrust on the valve can be varied by varying the load attached at one end of the lever.

Here you have learned about lever safety valve, its main parts, working, and where it is used. If you found this piece of information useful then don't forget to like and share.

Lever Safety Valve Assembly Drawing

Source: https://www.mechanicalbooster.com/2017/03/lever-safety-valve.html

Posted by: keithbourfere.blogspot.com

0 Response to "Lever Safety Valve Assembly Drawing"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel